锻压技术

基于0.618法的深筒制件首次拉深系数判定方法

英文标题：Judgment method of initial drawing coefficient for deep cylindrical parts based on 0.618 method

作者：陈邑黄珍媛肖尧周驰

关键词：拉深拉深系数减薄率 0.618法有限元法

分类号：TG356

出版年,卷(期):页码：2017,42(6):51-55

摘要：

首次拉深系数对深筒制件多次拉深成形工艺和成形件质量有重要的影响，工程应用中主要依靠经验和反复试错的方法来确定，如何快速、准确地设定深筒制件首次拉深系数成为生产中亟需解决的问题。提出了一种深筒制件首次拉深系数的确定方法，该方法以控制筒壁最大减薄率为目标，基于有限元模拟技术，应用0.618优化方法确定首次拉深系数。将该方法应用于某深筒制件案例，结果表明：该方法可以快速、准确地获得与经验法一致的结果；同时，使用DC01钢及相似材料进行多次拉深时，将首次拉深最大减薄率控制在11%，后续拉深能够顺利进行。

The initial drawing coefficient is an important parameter for multi-stage drawing process and product quality of deep cylindrical parts, which is mainly selected from experiences and repeated trials in engineering application. Therefore, it is urgent to select the initial drawing coefficient quickly and accurately for deep cylindrical parts. Therefore, a new method determining the initial drawing coefficient of deep cylindrical parts was put forward to get the maximum thickness reduction ratio by combining finite element method with 0.618 optimization method. A deep cylindrical experiment was conducted to test this new method. The result shows that the predictive accuracy of the new method is coincident with that gained by the empirical method. At the same time, the maximum thickness reduction ratio is controlled by 11% for steel DC01 or similar materials during the multistage deep drawing process, and the following process of deep drawing can be carried out successfully.

基金项目：

广东省自然科学基金资助项目（2016A030313519）

陈邑（1995-），男，硕士研究生黄珍媛（1975-），女，博士，副教授

参考文献：

［1］赵军, 易际明, 倪颋. 基于数值模拟的深筒形件多次拉深工艺与实验研究[J]. 热加工工艺, 2009, 38(17):94-96.

Zhao J, Yi J M, Ni T. Multistage drawing process of deep tube part based on numerical simulation analysis and experimental study[J]. Hot Working Technology, 2009, 38(17):94-96.

［2］林政武, 阮锋, 张世俊. 筒形件第一次拉深极限的公式判定法[J]. 锻压技术, 1999, 24(4):16-18.

Lin Z W, Ruan F, Zhang S J. Formula decision method of cylinder parts′ first time drawing limit[J]. Forging & Stamping Technology, 1999, 24(4):16-18.

［3］贺平, 王巍, 万良辉. 圆筒件极限拉深系数mk研究[J]. 锻压技术, 2005, 30(6):21-23.

He P, Wang W, Wan L H. Study of limit drawing coefficient mk of cup and cup with flange[J]. Forging & Stamping Technology, 2005, 30(6):21-23.

［4］聂慧慧, 池成忠, 黄莉莉,等. 基于塑性应变比的圆筒形件极限拉深系数预测[J]. 锻压技术, 2013, 38(1):143-146.

Nie H H, Chi C Z, Huang L L, et al. Prediction of limit drawing coefficient for cylinder based on plastic strain ratio[J]. Forging & Stamping Technology, 2013, 38(1):143-146.

［5］Fazli A, Arezoo B. Prediction of limiting drawing ratio considering the effective parameters of die arc region[J]. Journal of Materials Processing Technology, 2012, 212(4):745-751.

［6］Fazli A, Arezoo B. An analytical method for prediction of limiting drawing ratio for redrawing stages of axisymmetric deep drawn components[J]. Journal of Manufacturing Science & Engineering, 2014, 136(2):549-558.

［7］陈筱俊. 带凸缘筒形件首次拉深系数的选定[J]. 锻压技术, 1993, 28(4):16-18.

Chen X J. Seletion of with flange cylindrical parts′ initial drawing coefficient[J]. Forging & Stamping Technology, 1993, 28(4):16-18.

［8］Kim H K, Hong S K. FEMbased optimum design of multistage deep drawing process of molybdenum sheet[J]. Journal of Materials Processing Technology, 2007, 184(1):354-362.

［9］Abdelmaguid T F, AbdelMagied R K, Shazly M, et al. A dynamic programming approach for minimizing the number of drawing stages and heat treatments in cylindrical shell multistage deep drawing[J]. Computers & Industrial Engineering, 2013, 66(3):525-532.

［10］黄珍媛, 阮锋, 管灿. 基于有限元模拟的极限拉深系数优化[J]. 塑性工程学报, 2006, 13(1):32-35.

Huang Z Y, Ruan F, Guan C. Optimization of limiting drawing coefficient based on finite element analysis[J]. Journal of Plasticity Engineering, 2006, 13(1):32-35.

［11］陈劼实, 周贤宾, 刘长丽. 数值模拟中应用最小厚度准则预测板料成形极限[J]. 中国机械工程, 2006,17(S1):76-79.

Chen J S, Zhou X B, Liu C L. Sheet metal forming limit prediction with minimum thickness criterion in numerical simulation[J]. China Mechanical Engineering, 2006,17(S1):76-79.

［12］杨凯程, 赵伟, 陈丽. 虚拟成形速度对渐进成形数值模拟精度的影响[J]. 锻压技术, 2015, 40(2):103-106.

Yang K C, Zhao W, Chen L. Influence of virtual forming speed on the precision in the numerical simulation of incremental forming[J]. Forging & Stamping Technology, 2015, 40(2):103-106.

［13］曾建强. 带凸缘圆筒形件的拉深工艺计算方法[J]. 模具技术, 2003,(5):32-34.

Zeng J Q. Calculation method of with flange cylindrical parts′ deep drawing process [J]. Die and Mould Technology, 2003,(5):32-34.

［14］王赓劼, 吴文山, 林娇弟,等. 圆筒件多次拉深工序的数值模拟[J]. 轻工机械, 2008, 26(5):43-45.

Wang G J, Wu W S, Lin J D, et al. Numerical simulation of multstage drawing process of drawing cylinder[J]. Light Industry Machinery, 2008, 26(5):43-45.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】