锻压技术

汽车用6016铝板拉深试验及有限元研究

英文标题：Experimental and numerical investigations on the drawing performance of automotive aluminum sheet 6016

作者：谷珊珊刁可山李言波路旭胡晓蒋浩民

分类号：TG386

出版年,卷(期):页码：2017,42(1):126-130

摘要：

板料充分拉深是保证车身外板零件面品质量良好的重要条件，可通过研究板料的拉深性能来评价车身覆盖件的拉深充分性。针对不同厂商提供的6016铝板进行多组拉深试验，并基于拉深试验结果建立了高精度的有限元分析模型，验证了有限元方法模拟铝板拉深过程的可行性及可靠性，研究了材料、工艺及模具等主要参数对6016铝板拉深性能的影响规律。研究结果表明：6016铝板的拉深性能与材料力学参数n值、坯料厚径比t/D和凹模圆角半径成正相关，与压边力和摩擦系数呈负相关。基于有限元方法确定了4组6016铝板的极限拉深比LDR值，可用于指导实际拉深工艺的制定，提高生产效率。

To draw a sheet fully is an important premise of a good quality on automotive body surface, which can be valued by the drawing performance of sheet. Several drawing tests of aluminum sheet 6016 from different suppliers were conducted, and a finite element model (FEM) with high precision was built based on the experiment results. Then, the feasibility and reliability of the simulation results were validated, and the influences of major process parameters, such as material, process and die on the drawing properties of aluminum sheet 6016 were studied. The results show that the aluminum sheet drawing performance has a positive correlation with the material parameter n-value, ratio of thickness to diameter t/D and die radius, while a negative correlation with the blank hold force and friction factor. The limited drawing ratio(LDR) of four groups are determined by FEM to design the drawing process and enhance production efficiency.

基金项目：

谷珊珊（1989-），女，硕士，助理工程师 E-mail：gushan@baosteel.com

参考文献：

[1]许珞萍, 邵光杰, 李麟, 等. 汽车轻量化用金属材料及其发展动态[J]. 上海金属, 2002, 24(3):1-7.

Xu L P, Shao G J, Li L, et al. Process on metal materials used in the ultra light auto body[J]. Shanghai Metals, 2002, 24(3):1-7.

[2]Fridlyander I N, Sister V G, Grushko O E, et al. Aluminum alloys-promising materials in the automotive industry[J]. Metal Science and Heat Treatment, 2002, 44(9): 365-370.

[3]丁向群, 何国求, 陈成澍, 等. 6000系汽车车用铝合金的研究应用进展[J]. 材料科学与工程学报, 2005, 23(2): 302-305.

Ding X Q, He G Q, Chen C S, et al. Advance in studies of 6000 aluminum alloy for automobile[J]. Journal of Materials Science & Engineering, 2005, 23(2): 302-305.

[4]Jürgen Hirsch. Recent development in aluminium for automotive applications[J]. Transactions of Nonferrous Metals Society of China, 2014, 24(7): 1995-2002.

[5]汪军. 汽车用铝合金冲压成形性能研究[J]. 热加工工艺, 2015, 44(17):123-125.

Wang J. Study of stamping formability of aluminum alloy for automobile[J]. Hot Working Technology, 2015, 44(17): 123-125.

[6]Colgan M, Monaghan J. Deep drawing process: Analysis and experiment [J]. Journal of Materials Processing Technology, 2003,132(1): 35-41.

[7]孙成智, 陈冠龙, 罗思东,等. 变压边力对铝合金板冲压成形的影响研究[J]. 塑性工程学报, 2005, 12(3): 41-45.

Sun C Z, Chen G L, Luo S D, et al. Mechanism investigation of variable blank holder forces improving the formability of aluminum alloy sheets during sheet metal forming[J]. Journal of Plasticity Engineering, 2005, 12(3): 41-45.

[8]Ma W Y, Wang B Y, Fu L. Influence of process parameters on deep drawing of AA6111 aluminum alloy at elevated temperatures[J]. Journal of Central South University, 2015, 22(4): 1167-1174.

[9]GB/T 228.1—2010，金属材料拉伸试验第1部分：室温试验方法[S].

GB/T 228.1—2010，Metallic materials—Tensile testing—Part 1: Method of test at room temperature[S].

[10]GB/T 15825.2—2008，金属薄板成形性能与试验方法第2部分：通用试验规程[S].

GB/T 15825.2—2008，Sheet metal formability and test methods—Part 2：General test rules[S].

[11]于忠奇, 赵亦希, 林忠钦. 汽车用铝合金板拉深性能评估参数[J]. 中国有色金属学报, 2004, 14(10): 1689-1693.

Yu Z Q, Zhao Y X, Lin Z Q. Evaluation parameter of drawbility of automotive aluminum alloy sheets[J]. The Chinese Journal of Nonferrous Metals, 2004, 14(10): 1689-1693.

[12]孙钿科, 王绍清, 于红娟, 等.基于Dynaform仿真拉深成形过程参数研究[J]. 机械科学与技术, 2014, 33(4): 541-545.

Sun T K, Wang S Q, Yu H J, et al. Study on the processing parameters in the deep drawing process based on the simulation of Dynaform[J]. Mechanical Science and Technology for Aerospace Engineering, 2014, 33(4): 541-545.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】