锻压技术

改变摩擦方式的挤压成形研究现状

英文标题：Research status on extrusion with changing friction mode

作者：杨程张敏娜汤丹妮张喆赵升吨

分类号：TG301

出版年,卷(期):页码：2015,40(5):1-6

摘要：

挤压成形时坯料和模具之间的摩擦力使得成形载荷显著增加，严重影响模具寿命和工件质量。因此，改善摩擦条件、使之对成形的不利影响降低就成为目前挤压成形研究的关键之一。对静液挤压、挤压筒的有效摩擦、振动辅助挤压成形、往复旋转辅助挤压成形以及变滑动摩擦为滚动摩擦等几种改变摩擦方式的挤压成形进行了分析，结果表明：流体润滑、界面摩擦因子降低、摩擦矢量改变方向以及滚动摩擦代替滑动摩擦都能有效地降低摩擦对挤压成形的不利影响。

The friction between die and billet in extrusion will increase the forming load significantly, which results in poor precision and low die life. Therefore, it is critical to reduce friction and negative influences on metal forming. The approaches to realize extrusion by changing friction types were analyzed including hydrostatic extrusion, active friction of extrusion cylinder, vibration assisted extrusion, cyclic torsional assisted extrusion and changing slide friction to roll friction. The results show that fluid lubrication, reducing interface friction factor, changing friction vector direction and rolling friction can effectively reduce the negative influences on extrusion.

基金项目：

国家04重大科技专项（2011ZX04016-081-03）；陕西省自然科学基金资助项目（2012JM7019）；大学生创新创业项目 (201310703038)

杨程（1976-），男，博士，副教授

参考文献：

［1］俞汉清, 陈金德. 金属塑形成形原理[M]. 北京: 机械工业出版社, 1999.Yu H Q, Chen J D. Principle of Metal Plastic Forming[M]. Beijing: China Machine Press, 1999.
［2］赵振铎, 邵明志. 金属塑性成形中的摩擦与润滑[M]. 北京: 化学工业出版社, 2004.Zhao Z D, Shao M Z. Friction and Lubrication in Metal Plastic Forming[M]. Beijing: Chemical Industry Press, 2004.
［3］王仲仁, 张琦. 省力与近均匀成形-原理及应用[M]. 北京: 高等教育出版社, 2010. Wang Z R, Zhang Q. Less-Loading and Approaching Uniform Forming: Theory and Application [M]. Beijing: Higher Education Press, 2010.
［4］洪慎章. 冷挤压实用技术[M]. 北京: 机械工业出版社, 2005.Hong S Z. Cold Extrusion Technology[J]. Beijing: China Machine Press, 2005.
［5］胡俊, 吕彦, 任泽宁, 等. 静液挤压工艺的研究进展与应用[J]. 热加工工艺, 2014, 43(15): 20-23.Hu J, Lv Y, Ren Z N, et al. Research progress and application of hydrostatic extrusion technology[J]. Hot Working Technology, 2014, 43(15): 20-23.
［6］Berezhnoy V L. Non-traditional process techniques of extrusion and pressing [J]. The International Journal of Advanced Manufacturing Technology, 2000, 16: 19-22.
［7］薛文林. 有效摩擦力挤压机多孔挤压特点[J]. 轻金属, 1994, (12): 47-49.Xue W L. Characteristics of multi-hole extrusion by active frictional extruder [J]. Light Metals, 1994, (12):47-49.
［8］薛文林. 俄罗斯有效摩擦力挤压技术的开发[J]. 铝加工, 1995, 18(5): 35-38.Xue W L. Development of active frictional extrusion in Russia [J]. Aluminium Fabrication, 1995, 18(5): 35-38.
［9］薛文林. 俄罗斯的有效摩擦力挤压技术[J]. 轻合金加工技术, 1996, 24(5): 29-32.Xue W L. Active frictional extrusion in Russia[J]. Light Alloy Fabrication Technology, 1996, 24(5): 29-32.
［10］Moroz B, Müller K, 张育钦. 采用有效摩擦力反向挤压法生产难挤压的铝合金[J]. 铝加工技术, 1996, (1): 11-20.Moroz B, Müller K, Zhang Y Q. Extrusion of difficultly transform material by active friction[J]. Aluminium Working Technology, 1996, (1): 11-20.
［11］杨程, 赵升吨, 王军. 有效摩擦对挤压成形影响的研究[J]. 热加工工艺, 2009, 38(9): 61-65.Yang C, Zhao S D, Wang J. Effect of active friction on extrusion forming[J]. Hot Working Technology, 2009, 38(9): 61-65.
［12］李峰, 刘晓晶, 苑世剑. 摩擦条件对铝合金挤压变形流动行为的影响[J]. 中国有色金属学报, 2008, 18(11): 2014-2119.Li F, Liu X J, Yuan S J. Effect of friction condition on flow behavior of aluminum alloys during extrusion[J]. The Chinese Journal of Nonferrous Metals, 2008, 18(11): 2014-2119.
［13］曹凤国. 超声加工技术[M]. 北京: 化学工业出版社, 2005.Cao F G. Ultrasonic Machining Technology[M]. Beijing: Chemical Industry Press, 2005.
［14］Mousavi S A A A, Feizi H, Madoliat R. Investigations on the effects of ultrasonic vibrations in the extrusion process[J]. Journal of Materials Processing Technology, 2007,187-188: 657-661.
［15］Osakada K, Wang X, Hanami S. Precision forging of spline by flashless die forging with axially driven die[J]. CIRP Annals-Manufacturing Technology, 1997, 46(1): 209-212.
［16］Osakada K, Wang X, Hanami S. Precision forging process with axially driven container[J]. Journal of Materials Processing Technology, 1997, 71: 105-122.
［17］FELSS Shortcut Technologies. Axial forming [EB/OL]. http://www.felss.com/topic/axial-forming,2011-10-26.
［18］赵升吨, 李泳峄, 范淑琴. 超声振动塑性加工技术的现状分析[J]. 中国机械工程, 2013, 24(6): 835-840.Zhao S D, Li Y Y, Fan S Q. Status analysis of plastic processing technology with ultrasonic vibration [J]. China Mechanical Engineering, 2013, 24(6): 835-840.
［19］Bochniak W, Korbel A. Extrusion of CuZn39Pb2 alloy by the KOBO method [J]. Eng. Trans., 1999, 47:351-367.
［20］Bochniak W, Korbel A. Plastic flow of aluminum extruded, under complex conditions [J]. Mater. Sci. Technol., 2000, 16, 664-674.
［21］Bochniak W, Korbel A. KOBO-type forming: Forging of metals under complex conditions of the process[J]. Journal of Materials Processing Technology, 2003, 134:120-134.
［22］Bochniak W, Korbel A. Refinement and control of the metal structure elements by plastic deformation [J]. Scripta Materialia, 2004, 51:755-759.
［23］Bochniak W, Korbel A, Szyndler R, et al. New forging method of bevel gears from structural steel [J]. Journal of Materials Processing Technology, 2006, 173:75-83.
［24］Maciejewski J, Mroz Z. An upper-bound analysis of axisymmetric extrusion assisted by cyclic torsion [J]. Journal of Materials Processing Technology, 2008, 206: 333-344.
［25］王宏伟, 张宝红, 张治民. 曲线回转外形筒体零件无飞边辊轮引伸新技术[J]. 塑性工程学报, 2014, 21(3): 31-35.Wang H W, Zhang B H, Zhang Z M. Research on the new technology of the no-flash roll-die drawing of cylinder parts with curvilinear rotating shape [J]. Journal of Plasticity Engineering, 2014, 21(3): 31-35.

服务与反馈：

【本网站尚未开通全文下载服务】【加入收藏】